• Specialty Carbide - up to 50% longer life
• All RAC X Tips maximum working pressure: 4,050 psi

Water @ 2,000 psi, 138 bar, 13.8 MPa - paints with a higher viscosity will decrease the flow rate. Eg. for a tip with a 0.015 orifice and 6" (152 mm) pattern order LTX315

• 24" Fan Pattern - Get the job done in half the time!

Water @ 2,000 psi, 138 bar, 13.8 MPa - paints with a higher viscosity will decrease the flow rate. Eg. For a tip with a 0.027 orifice and a 24" (305 mm) pattern, order WR1227

• Blue colour matches new RAC X Tip
• Locking Tab - Tip snaps into spray & reverse position
• Aerodynamic design directs the material flow - virtually eliminating paint build up on inside of guard.
• Easy turn design of guard allows you to change the spray orientation from vertical to horizontal without loosening the nut! Time saver!
• To suit Graco / Titan 7/8" Thread

• Arrow shaped, black ergonomic handle
• Maximum working pressure: 4,050 psi
• Fits orange body

Water @ 2,000 psi, 13.8 MPa - paints with a higher viscosity will degrease the flow rate. For a tip with a 0.011" (0.28 mm) orifice and a 6" (152 mm) pattern, order 286311.

• Creates clean, lazer sharp lines with no fuzzy edges or thin spots. Row shaped yellow handle.

Water @ 2,000 psi, 13.8 MPa - paints with a higher viscosity will degrease the flow rate. For a tip with a 0.015" (0.38 mm) orifice and a 4" (102 mm) pattern, order LL5315.

Fan width of a spray pattern is measured at 6" (152 mm) from the surface with traffic paint at 2,000 psi (138 bar, 13.8 MPa)

• Pre-2003 Model Contractor / FTX Guns & SG3 Gun
• Gun Filter Assembly, 100 Mesh - 1 per card

• Pre-2003 Model Contractor / FTX Guns and SG3 Gun
• Gun Filter Screen Element, 50 Mesh - 2 per card

• Features new RAC X Tip System (517 Tip)
• Shuts fluid flow off at the tip for a clean, crisp pattern - no spitting.
• 180 deg tip swivel for ultimate versatility
• Pressure-Actuated - operates at a minimum 700 psi

• c/w RAC X Tip Guard (Tip not included)
• 7/8" thread gun nut (fits Graco or Titan Guns)

Use 181085 Gun Adapter to fit 11/16" Wagner

• Standard with 7/8" Graco or Titan Gun Nut to fit contractor In-Line Valve (PN 244161)
• Order 45 deg Adapter (PN 224399) to increase comfort if used with Airless Gun
• Includes 9" x 3/8" Nap Roller Cover
• Maximum working pressure: 3,600 psi
• 9" Roller Assy With 20" (50 cm) Extension c/w FREE 45 deg Gun Angle Adapter

Use Telescoping Extensions for pressure rolling only - do not use for Airless Spraying.

All Telescoping Extensions include Adapter 244825 - for use with 7/8" Contractor In-Line valve

18" to 36" (45 cm to 90 cm)

• Prevents paint and coatings from drying onto the displacement rod and packings.
• Extends pump life

• For use with Ultra Max (I & II). GMax & Hydra Max
• Long, Black, Vertical, 60 Mesh - 1 per card

• For use with old model 390/395ST & 490/49ST, etc
• Enamel Filter Screen, 100 Mesh - 2 per card

• Ultra Max 795/1095/1595 Hi-Boy, GMax