Pumpline - Products - Fibre Glassing

Fibre Glassing

Airless - Accessories Airless - Electric Airless - Guns and Hoses Airless - Petrol Airless - Pneumatic Electrostatic Applications Fibre Glassing Husky Pumps HVLP Plural Applications Line Markers Powder Coating Pressure Washers Project Solutions Texture Sprayers

Spartan II

Spartan ll is the state of the art dispensing equipment specifically designed for Resin Transfer Molding (RTM and RTM Lite) Injection. Available in two versions, the Standard, developed specifically for low pressure injection of polyester and vinyl ester resin systems and the Deluxe model, offering automatic injection.

Dispense Timer Maximizes Efficiency, Automatic Flush Button, Avoid Unscheduled Maintenance with the Gel Timer Whistle Alarm, Control at Low Pressure is the key to Successful RTM Lite Injection.

Superior Re-circulation, Trouble Free Injection, Air / Solvent Flush, Eliminate Pressure to Mold, Easy to Use Control Console.

SYSTEM SPECIFICATIONS

Air Requirements	17 cfm @ 100 psi 481 l / min @ 6.8 bar
Material Pump Output	2.5 gal / min 9.46 l / min
Catalyst Slave Pump Range	0.5% to 4.5%

OPTIONS

Extended Hose Lengths
In-Line Heater
High Volume Pump 5.0 gal / min 18.92 l / min
Magic Bullet / Automatic Remote Injection Valve

PN Spartan 2

INDy Dispense System

The INDy Dispense System combines the ultimate in Gun and Nozzle performance!

The INDy Gun is designed for low pressure application with non-atomized nozzles. An extra large mix area and precise balance check valves deliver quality performance in an easy-to-use piece of equipment.

The new INDy nozzle has been tested and documented to dispense polyester resin at the lowest possible levels of styrene emissions!

SYSTEM OPERATING SPECIFICATIONS

Air Requirements	17 cfm @ 100 psi 481 l/min @ 6.8 bar
Material Pump Output	2.5 gpm / 9.46 l/min
Catalyst Slave Pump Range	0.5% to 4.5%

PN INDY

Glas-Craft MCG, Multi-Color System

The Glas-Craft MCG, Multi-Color System, is a part of the AAC System product line. The MCG System utilizes the Glas-Craft LPA-II-AAC air assist containment spray gun. The LPA-II-AAC gun is equipped with the ACV-100 auto-catalyst valve as a standard feature on the MCG. The MCG also makes use of the Glas-Craft model SP-85 catalyst slave pump and the model 18913-00 11:1 ratio material pump. Each system comes complete with air manifold, hoses, kits, and user manuals.

The factory-assembled MCG has been designed to provide you the most efficient method available for production that requires numerous colors of gel-coat, or continuous change of colors. The quick, efficient color change of the MCG eliminates waste and damage of material.

SYSTEM OPERATING SPECIFICATIONS

Air Requirements	25 cfm @ 100 psi 708 l/min @ 6.8 bar
Material Pump Output	2.5 gpm / 9.46 l/min
Catalyst Slave Pump Range	0.5% to 4.5%

PN MCG

INDy Chopper

Non-atomized dispense of polyester resin is one of the single most important issues for open-mould processing. The new single orifice, directed column dispense technology of the INDy delivers unmatched performance. Operating at the lowest levels of styrene emissions and generating the most workable dispersion of material available.

PN INDy Chopper

Impingment-Mix Automatic Air-Purge Gun

THE ORIGINAL IMPINGEMENT-MIX AUTOMATIC AIR-PURGE GUN!
...for Polyurea Coatings and Polyurethane Foam Dispensing

The ability to change the mixing chamber inserts without removing the entire chamber or sideblocks. This allows you to independently adjust the volume and spray pattern size. This also assures low maintenance and long lasting side block seal life.

Lightweight, ergonomic, and compact design allows for comfortable spraying and manoeuvring into difficult spray positions.

More Powerful - Patented Dual Air Piston

Double the trigger force - no sluggish chamber movement when you pull the trigger.

PN Probler P2

^ top

Site design byCitrus Blue Web Creations